Haltech F9A User Manual download pdf (Page 28)

supplied. Installing the software on the Hard Disk will speed up the programme and avoid

having to fiddle around with floppy disks. The installation programme need only be run once.

If you do not have a Hard Disk, go to the section titled Running the Software from the

Floppy Drive.

To install the software follow these steps.

Boot up Computer

Turn your PCs power on and boot up MS-DOS as instructed by the computers Users Manual.

If a shell programme or menu utility runs automatically when you boot your computer, exit it

now. You should see something like this:

C:\>_

This is the ‘DOS Prompt’. It is DOS’ way of indicating that it is waiting for a command. The

C: indicates that the C drive is the drive currently selected. If you do not have a hard disk,

your prompt will probably look like this :

A:\>_

Select the Drive

To run the INSTALL programme, you must insert the supplied disk in the disk drive. If the

drive is the A drive, then it must be currently selected. To select the A drive (or B drive if it is

the required drive) type :

Dy or %y

The y key is the Enter Key. On some keyboards it may be called the Return key. You should

now see the prompt :

A:\>_ or B:\>_

Run the INSTALL Programme

To run the Install program type :

LQVWDOOy

The Install programme will now run. Follow the instructions given. The programme will

suggest that the software will be placed in the HALTECH directory. You can change the

destination directory, but it is not recommended that you do unless you understand how

directories work.

When it is finished, the installation programme will tell you if the installation is successful. If

it was not, consult the trouble shooting section of this manual.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 98 99

No comments

Haltech F9A User Manual Page 28